Here you will find the most common questions and answers.
The moisture condensation and the mold formation is very common and is a result of the low surface temperature of the wall. It can be solved immediately and permanently using special thermal paint, which eliminates the existing thermal bridges.
Recommended: CWC STOP CONDENSE/DIASEN and N.AG. PLUS/CIR for antibacterial protection.
The proper treatment is done before laying the tiles with waterproof elastic products. There are of course solutions addressing the waterproofing of joints, with a special waterproof impregnation. In special cases it is proposed to complete the waterproofing of old tile and installing new ones.
Recommended: DEFENDER ELU/CIR or UMBRELLA/ATRIA
The phenomenon of negative hydro pressure is very common and the proper treatment is always from the external surface. There are of course excellent materials that can solve moisture problems in basements internally and in very difficult applications, with proper selection and placement.
Recommended: AQUASTOP T-50/ DRACO
The surface must be thoroughly cleaned of dirt, grease etc. It can be cleaned by water blasting or sandblasting. Specific primer should be applied only if the concrete has been smoothed (old and dusty).
Recommended: GRIP PRIMER/DIASEN or IDROSEM PRIMER/ATRIA
The successful implementation is both the correct choice of materials and the correct installation. Although it seems simple to just use a roller it is not, because the details make the difference as the way to mix the materials, type of stirrer, spreading of material, time, waterproofing, protection in the corners and joints etc.
It is not necessary. There are special repair materials to re-weld bituminous membranes, which provide complete repair and protection.
There is another simple, quick and economical solution: the spreading of the roof with reflective – waterproofing resin, which is resistant to UV and extreme weather conditions, thus significantly reduces the temperature of the roof.
Recommended: ATRIATHERMIKA GUAINA/ATRIA
It depends on the use of application. Each case requires the right choice as a general rule certainly helps in a more effective solution. I could in many cases be used fiber reinforced waterproofing materials to avoid the use fiberglass.
Recommended: GT AR/ BIEMME
Yes, it is absolutely necessary to use the appropriate membranes and in no way should be avoided to reduce costs.
Recommended: BUTYLTAPE B1 or B2/AIB
For simple individual cases there are special sealants in paste form having flexibility, resilience and similar coloring. For large areas requires specific waterproofing membranes.
Recommended: FIBROSTUCK/AZICHEM or EPOSTUC/ATRIA
It is the methodology that is often selected by using specific hydro insulating materials bulking.
Recommended: DIASEAL STRONG/DIASEN or DRACOFLEX/DRACO
Most waterproofing materials work best on concrete, but there are special materials that can be applied onto existing tiles as well as final coating materials for the frequent use of the roof.
Recommended: UMBRELLA/ ATRIA or PROTECH BALCONY/AZICHEM
There are many types of coatings for exterior surfaces. Depending on the use and proper coloring, create a single durable surface without maintenance problems.
Certainly, with special resistant epoxy resins and coarse aggregate, thus creates an aesthetically pleasing surface of high abrasion resistance.
Recommended: FLOORGUM TYRE MONO/DIASEN
There are natural materials that can simultaneously have high insulating properties while creating a sound barrier and even at thicknesses less than 4 cm.
Recommended: THERMACTIVE 0.037/DIASEN
Of course, special epoxy coatings in combination with cork.
Recommended: ATRIATHERMIKA GREEN AIR or ATRIATHERMIKA FIBRAFACE/ATRIA
YES, special materials based on silicon, can create permanent, durable concrete surfaces, even for aggressive substances such as salts, acids, alkalis etc.
Recommended: STOP CEM and FINE CEM PLUS/CIR
Of course, there are specific materials with very thin coatings (1-2 mm), which are extremely resistant to any type of aggressive substances (from 0 to 14 PH).
Recommended: PROMOCEM and ULTRA FINISH/ CIR
Marbles and generally natural stones are porous surfaces, depending on the type of dirt and how aggressively they should be cleaned. This creates the right conditions for the selection of the cleaning product. Is not the same to clean dirt, rust or other oils than to clean color (graffiti). Also another condition is the surface to have historical value or to be new. Generally for every problem there is a solution guaranteed, simple and fast.
Recommended: RP 103/ CIR or PULIPIETRA SOFT/TURCOITALIANA
Yes, there is a way to clean and protect glass surfaces from dirt due to the environment (air pollutants, rain etc).
Recommended: HYDROFLEX PRO GLOSS/HYDROSOLUTIONS or GLASS PROTECTOR/CIR
Depends on the surface, if it is porous (natural stones) or non-porous (metal surfaces, smooth, etc.). Generally the porous surfaces are more difficult to be protected by the non-porous. Although permanent protection is not possible, but only for long time (depending on material selection).
Recommended: ADHESION PRIMER and GRAFFITI GUARD MAGIC/NEW PRO
Yes, there are special epoxy repair materials that can provide permanent solutions in the most difficult cases. There are also high-speed, high-speed repair mortars that offer quicker and more cost-effective solutions.
Recommended: OSMOCEM 447/AZICHEM or EPOMALT FAST 100/DRACO
Yes, it cleans, restores and protects the armor with a simple brush (brush) on its surface.
Recommended: CONVO 101/ TURCOITALIANA or CONVERTITORE DI RUGGINE/CIR
They generally work up to a maximum of 4 cm deep, but they are by no means comparable to direct armament applications.
Recommended: CONSILEX NO-RUST/AZICHEM
There are many alternatives (impregnation, color coating or coating) depending on the purpose of the application.
Recommended: PROTECH WAC-T/AZICHEM
Yes, there is a ready made waterproofing paste with polystyrene beads that has the same properties, is spatula and is very economical.
If you have any technical questions about our products and troubleshooting, please feel free to contact us.