Description

CONSACRILIC

HIGH-PENETRATION ACRYLIC CONSOLIDANT AND PRIMER FOR PAINTS, TO BE APPLIED ON MINERAL SURFACES.

CONSACRILIC can be applied only on surfaces that are absorbent, perfectly clean and perfectly dry. CONSACRILIC can be diluted in water in ratios 1:1 or 1:2 (respectively 50% and 33% of product diluted with water) according to the situation of deterioration of the surface or to the intended use. CONSACRILIC can be applied using low-pressure vaporizer, brush with soft and natural fibers or roller, saturating uniformly the surface in one or more coats. It is important to avoid stagnation of the product on the surface to avoid aesthetic defects. Wait at least 6/12 hours in order to verify the effectiveness of the treatment. Always perform preliminary test on the surface that has to be treated, in order to avoid possible undesirable effects. Technical Data: Appearance: semi-transparent, slightly yellow liquid, Specific Gravity: 1,02 Kg/l ±0,1, Particle diameter: 30 nm, Minimum filming temparature: 0 ±1 °C, Viscosity: 30 mPa.s, Drying time: from 1 to 6 hours, depending on atmospheric conditions.

Packaging: 5 lt/plastic tank